Browse to and select the file Toshiba TY-SP3(SH200)_V2.1.14_USA_BASS ON(+4dB).dfu.Any previously saved version will be replaced. Select “Download a new version of the firmware, saving a copy of the current version first.Select next to Start the firmware upgrade process.In device manager you should see “CSR BlueCore Bluetooth” under the Universal Serial Bus Controllers if the device driver software installed correctly. NOTE: If the “Device driver software installed correctly” does not appear after 1 minute you can release the power button and continue. When you receive the windows message that the “CSR BlueCore Bluetooth” “Device driver software installed correctly” you can release the power button.The computer will now start to install the device driver software.Connect a USB data cable between the speaker and PC.A beep should be heard from the speaker when it powers off this time.The speaker will then power off again after about 20 seconds.The speaker will power ON after a few seconds.Press and hold the power button again while performing the following steps.ĭuring the following steps you must continuously hold the power button down on the speaker.Release the power button on the speaker (after the power light has completed turned off).During this time the speaker will beep and shut off or come on then beep and shut off.Hold the power button down on the speaker for 30 seconds.Select Finish to “restart the computer now”.These tasks should be check marked by default: Select next to select the default start menu folder.Select next to select default component list.Select next to accept the default installation location.Read the Software License Agreement then select “I Accept the License agreement”.If you are prompted to allow the following program to make changes to this computer verify the publisher as “Cambridge Silicon Radio Ltd.” and click Yes.Right click on the extracted file called BlueSuite 2.5_Win7.exe and select "Run as administrator".Download and unzip the file called BlueSuite_2.5_Win7.zip.This update tool only works on computers running Windows 7 32 bit OS.
The USB power cable that came with your Bluetooth speaker will not work for this because it is only a USB power cable. Prior to upgrading you will need a USB Data cable to transfer data from you PC USB port to the USB port on the back of the Bluetooth speaker.
0 kommentar(er)
